EN 341: Personal protective equipment against falls from a height.
Descender devices
EN 352-2: Revised 2002 standards on hearing protectors. Safety
requirements and testing, generally about
earplugs.
EN 353-1: Personal protective equipment against falls from a height.
Guided type fall arresters including a rigid anchor
EN 353-2: Personal protective equipment against falls from a height.
Guided type fall arresters including a flexible anchor line
EN 354: Personal protective equipment against falls from a height.
Lanyards
EN 355: Personal protective equipment against falls from a height.
Energy absorbers
EN 358: Personal protective equipment for work positioning and
prevention of falls from a height. Belts for work positioning and restraint
and work positioning lanyards
EN 360: Personal protective equipment against falls from a height.
Retractable type fall arresters
EN 361: Personal protective equipment against falls from a height. Full
body harnesses
EN 362: Personal protective equipment against falls from a height.
Connectors
EN 363: Personal protective equipment against falls from a height. Fall
arrest systems
EN 374: Protective gloves against chemicals and micro-organisms
EN 381: Protective clothing for chainsaw users, e.g. trousers, jackets,
gloves, boots/gaiters.
EN 386: Glued laminated timber - Performance requirements and minimum
production requirements
EN 388: Protective gloves against mechanical risks
EN 390: Glued laminated timber. Sizes. Permissible deviations
EN 391: Glued laminated timber - Delamination tests of glue lines
EN 392: Glued laminated timber - Shear test of glue lines
EN 397: Specification for industrial safety helmets
EN 403: Respiratory protective devices for self-rescue. Filtering
devices with hood for escape from fire. Requirements, testing, marking.
EN 408: Structural timber and glued laminated timber — Determination of
some physical and mechanical properties
EN 417:
Non-refillable metallic cartridges for liquefied petroleum gases
EN 420: Protective gloves. General requirements and test methods
EN 438: Decorative high-pressure laminates (HPL) sheets based on
thermosetting resins.
EN 440: "Welding consumables wire electrodes and deposits for gas
shielded metal arc welding of non-alloy and fine grain steel -
Classification" (1994)
EN 450: Fly ash for concrete - Definitions, requirements and quality
control
EN 474: Earth-moving Machinery. Safety. General Requirements
EN 518: Structural timber. Grading. Requirements for visual strength
grading standards (replaced by EN 14081-1)
EN 519: Structural timber. Grading. Requirements for machine strength
graded timber and grading machines (Replaced by EN 14081-1)
EN 567: Mountaineering equipment. Rope clamps. Safety requirements and
test methods
EN 877: Cast iron pipes and
fittings, their joints and accessories for the evacuation of water from
buildings. Requirements, test methods and quality assurance
EN 926-1: Paragliding equipment - Paragliders - Part 1: Requirements and
test methods for structural strength
EN 926-2: Paragliding equipment - Paragliders - Part 2: Requirements and
test methods for classifying flight safety characteristics
EN 933-1: Test for geometrical properties of aggregates - Part 1:
determination of particle size distribution - Sieving method
EN 934-2: Admixtures for concrete, mortar and grout - Part 2: concrete
admixtures - Definitions and requirements
EN 980: Symbols for use in the labeling of medical devices
EN 1000–1989
EN 1010-1: Safety of machinery. Safety requirements for the design and
construction of printing and paper converting machines. Common requirements
EN 1010-2: Safety of machinery. Safety requirements for the design and
construction of printing and paper converting machines. Printing and
varnishing machines including pre-press machinery
EN 1010-3: Safety of machinery. Safety requirements for the design and
construction of printing and paper converting machines. Cutting machines
EN 1010-4: Safety of machinery. Safety requirements for the design and
construction of printing and paper converting machines. Bookbinding, paper
converting and finishing machines
EN 1010-5: Safety of machinery - Safety requirements for the design and
construction of printing and paper converting machines. Machines for the
production of corrugated board
EN 10217-4: Part 4: Electric welded non-alloy steel tubes with
specified low temperature properties
EN 10240: Internal and/or external protective coating for steel tubes -
specification for hot dip galvanized coatings applied in automatic plants
EN
Title
Status
10357-A
Hygienic and aseptic stainless steel tubes, fittings and connections
for food, pharmaceutical and chemical industries
Active
EN 11000–49999
EN 12102: Air conditioners, liquid chilling packages, heat pumps and
dehumidifiers with electrically driven compressors for space heating and
cooling - Measurement of airborne noise - Determination of the sound power
level
EN 13594:2002: Protective gloves for professional motorcycle riders.
Requirements and test methods
EN 13595-1:2002: Protective clothing for professional motorcycle riders.
Jackets, trousers and one piece or divided suits. General requirements
EN 13595-2:2002: Protective clothing for professional motorcycle riders.
Jackets, trousers and one piece or divided suits. Test method for
determination of impact abrasion resistance
EN 13595-3:2002: Protective clothing for professional motorcycle riders.
Jackets, trousers and one piece or divided suits. Test method for
determination of burst strength.
EN 13595-4:2002: Protective clothing for professional motorcycle riders.
Jackets, trousers and one piece or divided suits. Test methods for the
determination of impact cut resistance
EN 13612: Performance evaluation of in-vitro diagnostic devices
EN 13634:2002: Protective footwear for professional motorcycle riders.
Requirements and test methods
EN 13640: Stability testing of in vitro diagnostic reagents
EN 13757: Communication system for meters and remote reading of meters (Meter-Bus)
EN 13940:2016: System of concepts to support continuity of care
EN 14081-1: Timber structures - Strength graded structural timber with
rectangular cross section - Part 1: General requirements
EN 14081-2: Timber structures — Strength graded structural timber with
rectangular cross section — Part 2 : Machine grading; additional
requirements for initial type testing.
EN 14081-3:Timber structures — Strength graded structural timber with
rectangular cross section — Part 3: Machine grading; additional requirements
for factory production control.
EN 14081-4:Timber structures — Strength graded structural timber with
rectangular cross section — Part 4: Machine grading; grading machine
settings for machine controlled systems.
EN 15251: Indoor environmental input parameters for design and
assessment of energy performance of buildings- addressing indoor air
quality, thermal environment, lighting and acoustics
EN 16804: Diving equipment - Diving open heel fins - Requirements and
test methods
EN 16805: Diving equipment - Diving mask - Requirements and test methods
EN 16931-1: Electronic Invoicing - Semantic data model of the core
elements of an electronic invoice
EN 28601: Data elements and interchange formats; information
interchange; representation of dates and times
EN 45502-1: Active implantable medical devices - Part 1: General
requirements for safety, marking and information to be provided by the
manufacturer
EN 45545: Railway applications. Fire protection on railway vehicles.
EN 45545-1: Railway applications. Fire protection on railway
vehicles. General
EN 45545-2: Railway applications. Fire protection on railway
vehicles. Requirements for fire behaviour of materials and components
EN 45545-3: Railway applications. Fire protection on railway
vehicles. Fire resistance requirements for fire barriers
EN 45545-4: Railway applications. Fire protection on railway
vehicles. Fire safety requirements for rolling stock design
EN 45545-5: Railway applications. Fire protection on railway
vehicles. Fire safety requirements for electrical equipment including
that of trolley buses, track guided buses and magnetic levitation
vehicles
EN 45545-6: Railway applications. Fire protection on railway
vehicles. Fire control and management systems
EN 45545-7: Railway applications. Fire protection on railway
vehicles. Fire safety requirements for flammable liquid and flammable
gas installations
EN 50000–59999 (CEN specific, non-IEC electrical standards)
EN 50022: 35 mm snap-on top-hat mounting rails for low-voltage
switchgear (DIN
rail)
EN 50102: Degrees of protection provided by enclosures for electrical
equipment against external mechanical impacts
EN 50119: Railway applications - Fixed installations: Electric traction
overhead contact lines for railways
EN 50121: Railway applications - Electromagnetic compatibility
EN 50121-1: Railway applications - Electromagnetic compatibility
Part 1: General
EN 50121-2: Railway applications - Electromagnetic compatibility -
Part 2 : emission of the whole railway system to the outside world
EN 50121-3-1: Railway applications - Electromagnetic compatibility -
Part 3-1 : rolling stock - Train and complete vehicle
EN 50121-3-2: Railway applications - Electromagnetic compatibility -
Part 3-2 : rolling stock - Apparatus
EN 50121-4: Railway applications - Electromagnetic compatibility -
Part 4 : emission and immunity of the signaling and telecommunications
apparatus
EN 50121-5: Railway applications - Electromagnetic compatibility -
Part 5: Emission and immunity of fixed power supply installations and
apparatus
EN 50122: Railway applications - Fixed installations
EN 50122-1: Railway applications - Fixed installations - Electrical
safety, earthing and the return circuit - Part 1: Protective provisions
against electric shock
EN 50122-2: Railway applications - Fixed installations - Part 2:
Protective provisions against the effects of Stray currents caused by
d.c. traction systems
EN 50122-3: Railway applications - Fixed installations - Electrical
safety, earthing and the return circuit - Part 3: Mutual Interaction of
a.c. and d.c. traction systems
EN 50123: Railway applications - Fixed installations - D.C. switchgear
EN 50124: Railway applications - Insulation coordination
EN 50125-2: Railway applications - Environmental conditions for
equipment - Part 2: Fixed electrical installations
EN 50125-3: Railway applications - Environmental conditions for
equipment - Part 3: Equipment for signaling and telecommunications
EN 50126: Railway applications - The specification and demonstration of
reliability, availability, maintainability and safety (RAMS)
EN 50128: Railway applications - Communications, signaling and
processing systems
EN 50129: Railway applications - Communications, signaling and
processing systems - Safety related electronic systems for signaling
EN 50130: Alarm systems - Electromagnetic compatibility and
Environmental test methods
EN 50131: Alarm systems - Intrusion and hold-up systems
EN 50136: Alarm systems - Alarm transmission systems
EN 50153: Railway applications - Rolling stock - Protective provisions
relating to electrical hazards
EN
50155: Railway applications - Electronic equipment used on rolling stock
EN 50157: Domestic and Similar Electronic Equipment Interconnection
Requirements (Part1 =
AV.link)
EN 50158: Railway applications - Communication, signalling and
processing systems - Software for railway control and protection systems
EN 50159: Railway applications - Communication, signaling and processing
systems - Safety-related communication in transmission systems
EN 50159-1: Railway applications - Communication, signaling and
processing systems - Part 1: Safety-related communication in closed
transmission systems
EN 50159-2: Railway applications - Communication, signaling and
processing systems - Part 2: Safety-related communication in open
transmission systems
EN 50163: railway applications supply voltages of traction systems
EN 50178: Electronic equipment for use in power installations
EN 60065: Audio, Video and similar electronics apparatus - Safety
requirements.
EN 60950-1: Information technology equipment - Safety - Part1: General
requirements
EN 60950-21: Information technology equipment - Safety - Part21: Remote
power feeding
EN 60950-22: Information technology equipment - Safety - Part22:
Equipment installed outdoors
EN 60950-23: Information technology equipment - Safety - Part23: Large
data storage equipment
EN 61000-1-2: Electromagnetic compatibility (EMC). General. Methodology
for the achievement of functional safety of electrical and electronic
systems including equipment with regard to electromagnetic phenomena
EN 61000-1-3: Electromagnetic compatibility (EMC). General. The effects
of high-altitude EMP (HEMP) on civil equipment and systems
EN 61000-1-4: Electromagnetic compatibility (EMC). General. Historical
rationale for the limitation of power-frequency conducted harmonic current
emissions from equipment, in the frequency range up to 2 kHz
EN 61000-1-5: Electromagnetic compatibility (EMC). General. High power
electromagnetic (HPEM) effects on civil systems
EN 61000-1-6: Electromagnetic compatibility (EMC). General. Guide to the
assessment of measurement uncertainty
EN 61000-2-2: Electromagnetic compatibility (EMC). Environment.
Compatibility levels for low-frequency conducted disturbances and signaling
in public low-voltage power supply systems
EN 61000-2-4: Electromagnetic compatibility (EMC). Environment.
Compatibility levels in industrial plants for low-frequency conducted
disturbances
EN 61000-2-9: Electromagnetic compatibility (EMC). Environment.
Description of HEMP environment. Radiated disturbance. Basic EMC publication
EN 61000-2-10: Electromagnetic compatibility (EMC). Environment.
Description of HEMP environment. Conducted disturbance
EN 61000-2-12: Electromagnetic compatibility (EMC). Environment.
Compatibility levels for low-frequency conducted disturbances and signaling
in public medium-voltage power supply systems
EN 61000-3-2: Electromagnetic compatibility (EMC). Limits. Limits for
harmonic current emissions (equipment input current up to and including 16 A
per phase)
EN 61000-3-3: Electromagnetic compatibility (EMC). Limits. Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current ≤ 16 A per phase and not
subject to conditional connection
EN 61000-3-11: Electromagnetic compatibility (EMC). Limits. Limitation
of voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems. Equipment with rated voltage current ≤ 75 A and subject to
conditional connection
EN 61000-3-12: Electromagnetic compatibility (EMC). Limits.
EN 61000-4-1: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Overview of IEC 61000-4 series
EN 61000-4-2: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Electrostatic discharge immunity test. Basic EMC
publication
EN 61000-4-3: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Radiated, radio-frequency, electromagnetic field
immunity test
EN 61000-4-4: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Electrical fast transient/burst immunity test
EN 61000-4-5: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Surge immunity test
EN 61000-4-6: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Immunity to conducted disturbances, induced by
radio-frequency fields
EN 61000-4-7: Electromagnetic compatibility (EMC). Testing and
measurement techniques. General guide on harmonics and interharmonics
measurements and instrumentation, for power supply systems and equipment
connected thereto
EN 61000-4-8: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Power frequency magnetic field immunity test. Basic
EMC publication
EN 61000-4-11: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Voltage dips, short interruptions and voltage
variations immunity tests
EN 61000-4-12: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Oscillatory waves immunity test. Basic EMC
publication
EN 61000-4-13: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Harmonics and interharmonics including mains
signaling at a.c. power port, low frequency immunity tests
EN 61000-4-14: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Voltage fluctuation immunity test for equipment with
input current not exceeding 16 A per phase
EN 61000-4-15: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Flickermeter. Functional and design specifications.
Basic EMC publication
EN 61000-4-16: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Test for immunity to conducted, common mode
disturbances in the frequency range 0 Hz to 150 kHz
EN 61000-4-17: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Ripple on d.c. input power port immunity test
EN 61000-4-18: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Damped oscillatory wave immunity test
EN 61000-4-19: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Test for immunity to conducted, differential mode
disturbances and signaling in the frequency range 2 kHz to 150 kHz at a.c.
power ports
EN 61000-4-20: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Emission and immunity testing in transverse
electromagnetic (TEM) waveguides
EN 61000-4-21: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Reverberation chamber test methods
EN 61000-4-22: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Radiated emission and immunity measurements in fully
anechoic rooms (FARs)
EN 61000-4-23: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Test methods for protective devices for HEMP and
other radiated disturbances
EN 61000-4-24: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Test methods for protective devices for HEMP
conducted disturbance. Basic EMC publication
EN 61000-4-25: Electromagnetic compatibility (EMC). Testing and
measurement techniques. HEMP immunity test methods for equipment and systems
EN 61000-4-27: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Unbalance, immunity test for equipment with input
current not exceeding 16 A per phase
EN 61000-4-28: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Variation of power frequency, immunity test for
equipment with input current not exceeding 16 A per phase
EN 61000-4-29: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Voltage dips, short interruptions and voltage
variations on d.c.input power ports. Immunity tests. Basic EMC Publication.
EN 61000-4-30: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Testing and measurement techniques. Power quality
measurement methods
EN 61000-4-34: Electromagnetic compatibility (EMC). Testing and
measurement techniques. Voltage dips, short interruptions and voltage
variations immunity tests for equipment with mains current more than 16 A
per phase
IEC 61000-5-1 Electromagnetic compatibility (EMC). Installation and
mitigation guidelines. General considerations. Basic EMC publication
EN 61000-5-5 Electromagnetic compatibility (EMC). Installation and
mitigation guidelines. Specification of protective devices for HEMP
conducted disturbance. Basic EMC publication
EN 61000-5-7 Electromagnetic compatibility (EMC). Installation and
mitigation guidelines. Degrees of protection by enclosures against
electromagnetic disturbances (EM code). Degrees of protection against
electromagnetic disturbances provided by enclosures (EM code)
EN 61000-6-1 Electromagnetic compatibility (EMC). Generic standards.
Immunity for residential, commercial and light-industrial environments
EN 61000-6-2 Electromagnetic compatibility (EMC). Generic standards.
Immunity for industrial environments
EN 61000-6-3 Electromagnetic compatibility (EMC). Generic standards.
Emission standard for residential, commercial and light-industrial
environments
EN 61000-6-4 Electromagnetic compatibility (EMC). Generic standards.
Emission standard for industrial environments
EN 62061 /IEC
62061 Safety of machinery: Functional safety of electrical, electronic
and programmable electronic control systems