Standard | Title | Notes |
---|---|---|
ASTM AIIMASTM | Portable Document Format-Healthcare (PDF) A Best Practices Guide | |
ASTM A1 | Standard Specification for Carbon Steel Tee Rails | |
ASTM A2 | Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types | |
ASTM A3 | Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) | |
ASTM A6/A6M | Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling | |
ASTM A20/A20M | Standard Specification for General Requirements for Steel Plates for Pressure Vessels | |
ASTM A27/A27M | Standard Specification for Steel Castings, Carbon, for General Application | |
ASTM A29/A29M | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought | |
ASTM A31 | Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels | |
ASTM A34/A34M | Standard Practice for Sampling and Procurement Testing of Magnetic Materials | |
ASTM A36/A36M | Standard Specification for Carbon Structural Steel | |
ASTM A47/A47M | Standard Specification for Ferritic Malleable Iron Castings | |
ASTM A48/A48M | Standard Specification for Gray Iron Castings | |
ASTM A49 | Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars | |
ASTM A53/A53M | Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | |
ASTM A65 | Standard Specification for Steel Track Spikes | |
ASTM A66 | Standard Specification for Steel Screw Spikes | |
ASTM A67 | Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked | |
ASTM A74 | Standard Specification for Cast Iron Soil Pipe and Fittings | |
ASTM A90/A90M | Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | |
ASTM A99 | Standard Specification for Ferromanganese | |
ASTM A100 | Standard Specification for Ferrosilicon | |
ASTM A101 | Standard Specification for Ferrochromium | |
ASTM A102 | Standard Specification for Ferrovanadium | |
ASTM A105/A105M | Standard Specification for Carbon Steel Forgings for Piping Applications | |
ASTM A106/A106M | Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service | |
ASTM A108 | Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished | |
ASTM A109/A109M | Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled | |
ASTM A111 | Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire | |
ASTM A116 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric | |
ASTM A121 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire | |
ASTM A123/A123M | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products | |
ASTM A125 | Standard Specification for Steel Springs, Helical, Heat-Treated | |
ASTM A126 | Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings | |
ASTM A128/A128M | Standard Specification for Steel Castings, Austenitic Manganese | |
ASTM A131/A131M | Standard Specification for Structural Steel for Ships | |
ASTM A132 | Standard Specification for Ferromolybdenum | |
ASTM A134 | Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) | |
ASTM A135/A135M | Standard Specification for Electric-Resistance-Welded Steel Pipe | |
ASTM A139/A139M | Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) | |
ASTM A143/A143M | Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement | |
ASTM A144 | Standard Specification for Ferrotungsten | |
ASTM A146 | Standard Specification for Molybdenum Oxide Products | |
ASTM A148/A148M | Standard Specification for Steel Castings, High Strength, for Structural Purposes | |
ASTM A153/A153M | Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware | |
ASTM A159 | Standard Specification for Automotive Gray Iron Castings | |
ASTM A167 | Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip | (Withdrawn 2014, no replacement) |
ASTM A178/A178M | Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes | |
ASTM A179/A179M | Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | |
ASTM A181/A181M | Standard Specification for Carbon Steel Forgings, for General-Purpose Piping | |
ASTM A182/A182M | Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service | |
ASTM A183 | Standard Specification for Carbon Steel Track Bolts and Nuts | |
ASTM A184/A184M | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement | |
ASTM A192/A192M | Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service | |
ASTM A193/A193M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications | Grade B7 Studs bolts and Grade B16 Studs bolts fall in this category and are used for high temperature, high-pressure environments like petroleum industry. |
ASTM A194/A194M | Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both | |
ASTM A197/A197M | Standard Specification for Cupola Malleable Iron | |
ASTM A203/A203M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel | |
ASTM A204/A204M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum | |
ASTM A209/A209M | Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes | |
ASTM A210/A210M | Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes | |
ASTM A213/A213M | Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes | |
ASTM A214/A214M | Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes | |
ASTM A216/A216M | Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service | |
ASTM A217/A217M | Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
ASTM A220/A220M | Standard Specification for Pearlitic Malleable Iron | |
ASTM A225/A225M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel | |
ASTM A227/A227M | Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs | |
ASTM A228/A228M | Standard Specification for Steel Wire, Music Spring Quality | |
ASTM A230/A230M | Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality | |
ASTM A231/A231M | Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire | |
ASTM A232/A232M | Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire | |
ASTM A234/A234 | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service | |
ASTM A239 | Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles, | |
ASTM A240/A240M | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications | |
ASTM A242/A242M | Standard Specification for High-Strength Low-Alloy Structural Steel | |
ASTM A247 | Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings | |
ASTM A249/A249M | Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes | |
ASTM A250/A250M | Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes | |
ASTM A252 | Standard Specification for Welded and Seamless Steel Pipe Piles | |
ASTM A254/A254M | Standard Specification for Copper-Brazed Steel Tubing | |
ASTM A255 | Standard Test Methods for Determining Hardenability of Steel | Includes the Jominy test and a method based on work by M. A. Grossman (the Grossman method).[1] |
ASTM A262 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels | |
ASTM A263 | Standard Specification for Stainless Chromium Steel-Clad Plate | |
ASTM A264 | Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate | |
ASTM A265 | Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate | |
ASTM A266/A266M | Standard Specification for Carbon Steel Forgings for Pressure Vessel Components | |
ASTM A268/A268M | Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service | |
ASTM A269/A269M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service | |
ASTM A270/A270M | Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing | |
ASTM A275/A275M | Standard Practice for Magnetic Particle Examination of Steel Forgings | |
ASTM A276/A276M | Standard Specification for Stainless Steel Bars and Shapes | |
ASTM A278/A278M | Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C) | |
ASTM A283/A283M | Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates | |
ASTM A285/A285M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength | |
ASTM A288 | Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators | |
ASTM A289/A289M | Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators | |
ASTM A290/A290M | Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears | |
ASTM A291/A291M | Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears | |
ASTM A295/A295M | Standard Specification for High-Carbon Anti-Friction Bearing Steel | |
ASTM A297/A297M | Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application | |
ASTM A299/A299M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon | |
ASTM A302/A302M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
ASTM A304 | Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements | |
ASTM A307 | Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength | |
ASTM A311/A311M | Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements | |
ASTM A312/A312M | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes | |
ASTM A313/A313M | Standard Specification for Stainless Steel Spring Wire | |
ASTM A314 | Standard Specification for Stainless Steel Billets and Bars for Forging | |
ASTM A319 | Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts | |
ASTM A320/A320M | Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service | |
ASTM A322 | Standard Specification for Steel Bars, Alloy, Standard Grades | |
ASTM A323 | Standard Specification for Ferroboron | |
ASTM A324 | Standard Specification for Ferrotitanium | |
ASTM A325/A325M | Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength | (Withdrawn 2016, replaced by F3125/F3125M) |
ASTM A327/A327M | Standard Test Methods for Impact Testing of Cast Irons | |
ASTM A328/A328M | Standard Specification for Steel Sheet Piling | |
ASTM A333/A333M | Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness | |
ASTM A334/A334M | Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service | |
ASTM A335/A335M | Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service | |
ASTM A336/A336M | Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts | |
ASTM A338 | Standard Specification for Malleable Iron Flanges, Jeff, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C) | |
ASTM A340 | Standard Terminology of Symbols and Definitions Relating to Magnetic Testing | |
ASTM A341/A341M | Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods | |
ASTM A342/A342M | Standard Test Methods for Permeability of Weakly Magnetic Materials | |
ASTM A343/A343M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame | |
ASTM A345 | Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications | |
ASTM A348/A348M | Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame | |
ASTM A350/A350M | Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components | |
ASTM A351/A351M | Standard Specification for Castings, Austenitic, for Pressure-Containing Parts | |
ASTM A352/A352M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service | |
ASTM A353/A353M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel | |
ASTM A354 | Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners | |
ASTM A355 | Standard Specification for Steel Bars, Alloys, for Nitriding | |
ASTM A356/A356M | Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines | |
ASTM A358/A358M | Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications | |
ASTM A363 | Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand | |
ASTM A367 | Standard Test Methods of Chill Testing of Cast Iron | |
ASTM A368 | Standard Specification for Stainless Steel Wire Strand | |
ASTM A369/A369M | Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service | |
ASTM A370 | Standard Test Methods and Definitions for Mechanical Testing of Steel Products | |
ASTM A372/A372M | Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels | |
ASTM A376/A376M | Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service | |
ASTM A377 | Standard Index of Specifications for Ductile-Iron Pressure Pipe | |
ASTM A380/A380M | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems | |
ASTM A381 | Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems | |
ASTM A384/A384M | Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies | |
ASTM A385/A385M | Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip) | |
ASTM A387/A387M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum | |
ASTM A388/A388M | Standard Practice for Ultrasonic Examination of Steel Forgings | |
ASTM A389/A389M | Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service | |
ASTM A390 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) | |
ASTM A391/A391M | Standard Specification for Grade 80 Alloy Steel Chain | |
ASTM A392 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric | |
ASTM A394 | Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare | |
ASTM A395/A395M | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures | |
ASTM A400 | Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties | |
ASTM A401/A401M | Standard Specification for Steel Wire, Chromium-Silicon Alloy | |
ASTM A403/A403M | Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings | |
ASTM A407 | Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs | |
ASTM A409/A409M | Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service | |
ASTM A411 | Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire | |
ASTM A413/A413M | Standard Specification for Carbon Steel Chain | |
ASTM A414/A414M | Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels | |
ASTM A416/A416M | Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete | |
ASTM A418/A418M | Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
ASTM A420/A420M | Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service | |
ASTM A421/A421M | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete | |
ASTM A423/A423M | Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes | |
ASTM A424/A424M | Standard Specification for Steel, Sheet, for Porcelain Enameling | |
ASTM A426/A426M | Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service | |
ASTM A427/A427M | Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction | |
ASTM A428/A428M | Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | |
ASTM A434/A434M | Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | |
ASTM A435/A435M | Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates | |
ASTM A436 | Standard Specification for Austenitic Gray Iron Castings | |
ASTM A437/A437M | Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service | |
ASTM A439/A439M | Standard Specification for Austenitic Ductile Iron Castings | |
ASTM A447/A447M | Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service | |
ASTM A449 | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | |
ASTM A450/A450M | Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes | |
ASTM A451/A451M | Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service | |
ASTM A453/A453M | Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels | |
ASTM A455/A455M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | |
ASTM A456/A456M | Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings | |
ASTM A459 | Standard Specification for Zinc-Coated Flat Steel Armoring Tape | |
ASTM A460 | Standard Specification for Copper-Clad Steel Wire Strand | |
ASTM A463/A463M | Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process | |
ASTM A466/A466M | Standard Specification for Weldless Chain | |
ASTM A467/A467M | Standard Specification for Machine and Coil Chain | |
ASTM A469/A469M | Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors | |
ASTM A470/A470M | Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts | |
ASTM A471/A471M | Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | |
ASTM A472/A472M | Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
ASTM A473 | Standard Specification for Stainless Steel Forgings | |
ASTM A474 | Standard Specification for Aluminum-Coated Steel Wire Strand | |
ASTM A475 | Standard Specification for Zinc-Coated Steel Wire Strand | |
ASTM A476/A476M | Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls | |
ASTM A478 | Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire | |
ASTM A479/A479M | Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels | |
ASTM A480/A480M | Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
ASTM A481 | Standard Specification for Chromium Metal | |
ASTM A482/A482M | Standard Specification for Ferrochrome-Silicon | |
ASTM A483/A483M | Standard Specification for Silicomanganese | |
ASTM A484/A484M | Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings | |
ASTM A485 | Standard Specification for High Hardenability Antifriction Bearing Steel | |
ASTM A487/A487M | Standard Specification for Steel Castings Suitable for Pressure Service | |
ASTM A488/A488M | Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel | |
ASTM A489 | Standard Specification for Carbon Steel Lifting Eyes | |
ASTM A490/A490M | Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength | (Withdrawn 2016, replaced by F3125/F3125M) |
ASTM A491 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric | |
ASTM A492 | Standard Specification for Stainless Steel Rope Wire | |
ASTM A493 | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging | |
ASTM A494/A494M | Standard Specification for Castings, Nickel and Nickel Alloy | |
ASTM A495 | Standard Specification for Calcium-Silicon Alloys | |
ASTM A498/A498M | Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | |
ASTM A499 | Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails | |
ASTM A500/A500M | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | |
ASTM A501/A501M | Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | |
ASTM A502 | Standard Specification for Rivets, Steel, Structural | |
ASTM A503/A503M | Standard Specification for Ultrasonic Examination of Forged Crankshafts | |
ASTM A504/A504M | Standard Specification for Wrought Carbon Steel Wheels | |
ASTM A505 | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
ASTM A506 | Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
ASTM A507 | Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
ASTM A508/A508M | Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels | |
ASTM A510/A510M | Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel | |
ASTM A511/A511M | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar | |
ASTM A512 | Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing | |
ASTM A513/A513 | Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing | |
ASTM A514/A514 | Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding | |
ASTM A515/A515M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service | |
ASTM A516/A516M | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service | |
ASTM A517/A517M | Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered | |
ASTM A518/A518M | Standard Specification for Corrosion-Resistant High-Silicon Iron Castings | |
ASTM A519/A519 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing | |
ASTM A521/A521M | Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use | |
ASTM A522/A522M | Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service | |
ASTM A523 | Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits | |
ASTM A524 | Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | |
ASTM A529/A529M | Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality | |
ASTM A530/A530M | Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe | |
ASTM A531/A531M | Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings | |
ASTM A532/A532M | Standard Specification for Abrasion-Resistant Cast Irons | |
ASTM A533/A533M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel | |
ASTM A534 | Standard Specification for Carburizing Steels for Anti-Friction Bearings | |
ASTM A536 | Standard Specification for Ductile Iron Castings | |
ASTM A537/A537M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel | |
ASTM A540/A540M | Standard Specification for Alloy-Steel Bolting for Special Applications | |
ASTM A541/A541M | Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components | |
ASTM A542/A542M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium | |
ASTM A543/A543M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum | |
ASTM A550 | Standard Specification for Ferrocolumbium (Ferroniobium) | |
ASTM A551/A551M | Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications | |
ASTM A553/A553M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel | |
ASTM A554 | Standard Specification for Welded Stainless Steel Mechanical Tubing | |
ASTM A555/A555M | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods | |
ASTM A556/A556M | Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | |
ASTM A560/A560M | Standard Specification for Castings, Chromium-Nickel Alloy | |
ASTM A561 | Standard Practice for Macroetch Testing of Tool Steel Bars | |
ASTM A562/A562M | Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings | |
ASTM A563M | Standard Specification for Carbon and Alloy Steel Nuts (Metric) | |
ASTM A563 | Standard Specification for Carbon and Alloy Steel Nuts | |
ASTM A564/A564M | Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes | |
ASTM A565/A565M | Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service | |
ASTM A568/A568M | Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for | |
ASTM A570 | Standard Specification for Steel, Sheet and Strip, Carbon, Hot-Rolled | (Withdrawn 2000, replaced by A1011/A1011M) |
ASTM A571/A571M | Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service | |
ASTM A572/A572M | Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel | |
ASTM A573/A573M | Standard Specification for Structural Carbon Steel Plates of Improved Toughness | |
ASTM A574 | Standard Specification for Alloy Steel Socket-Head Cap Screws | |
ASTM A575 | Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades | |
ASTM A576 | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality | |
ASTM A577/A577M | Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates | |
ASTM A578/A578M | Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications | |
ASTM A579/A579M | Standard Specification for Superstrength Alloy Steel Forgings | |
ASTM A580/A580M | Standard Specification for Stainless Steel Wire | |
ASTM A581/A581M | Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods | |
ASTM A582/A582M | Standard Specification for Free-Machining Stainless Steel Bars | |
ASTM A586 | Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand | |
ASTM A587 | Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry | |
ASTM A588/A588M | Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance | |
ASTM A589/A589M | Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe | |
ASTM A592/A592M | Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels | |
ASTM A595/A595M | Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use | |
ASTM A596/A596M | Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens | |
ASTM A597/A597M | Standard Specification for Cast Tool Steel | |
ASTM A598/A598M | Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores | |
ASTM A599/A599M | Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet | |
ASTM A600 | Standard Specification for Tool Steel High Speed | |
ASTM A601/A601M | Standard Specification for Electrolytic Manganese Metal | |
ASTM A602 | Standard Specification for Automotive Malleable Iron Castings | |
ASTM A603 | Standard Specification for Zinc-Coated Steel Structural Wire Rope | |
ASTM A604/A604M | Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets | |
ASTM A606/A606M | Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance | |
ASTM A608/A608M | Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures | |
ASTM A609/A609M | Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof | |
ASTM A610 | Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size | |
ASTM A612/A612M | Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service | |
ASTM A615/A615M | Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement | |
ASTM A618/A618M | Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing | |
ASTM A623M | Standard Specification for Tin Mill Products, General Requirements [Metric] | |
ASTM A623 | Standard Specification for Tin Mill Products, General Requirements | |
ASTM A624/A624M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced | |
ASTM A625/A625M | Standard Specification for Tin Mill Products, Black Plate, Single-Reduced | |
ASTM A626/A626M | Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced | |
ASTM A627 | Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities | |
ASTM A630 | Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate | |
ASTM A632 | Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service | |
ASTM A633/A633M | Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates | |
ASTM A635/A635M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for | |
ASTM A636 | Standard Specification for Nickel Oxide Sinter | |
ASTM A638/A638M | Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service | |
ASTM A640 | Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable | |
ASTM A641/A641M | Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire | |
ASTM A644 | Standard Terminology Relating to Iron Castings | |
ASTM A645/A645M | Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated | |
ASTM A646/A646M | Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings | |
ASTM A648 | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe | |
ASTM A649/A649M | Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery | |
ASTM A650/A650M | Standard Specification for Tin Mill Products, Black Plate, Double Reduced | |
ASTM A653/A653M | Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
ASTM A656/A656M | Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability | |
ASTM A657/A657M | Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced | |
ASTM A659/A659M | Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled | |
ASTM A660/A660M | Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service | |
ASTM A662/A662M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
ASTM A663/A663M | Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties | |
ASTM A664 | Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications | |
ASTM A666 | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar | |
ASTM A667/A667M | Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders | |
ASTM A668/A668M | Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use | |
ASTM A671/A671M | Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures | |
ASTM A672/A672M | Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures | |
ASTM A673/A673M | Standard Specification for Sampling Procedure for Impact Testing of Structural Steel | |
ASTM A674 | Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids | |
ASTM A675/A675M | Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties | |
ASTM A677 | Standard Specification for Nonoriented Electrical Steel Fully Processed Types | |
ASTM A679/A679M | Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn | |
ASTM A681 | Standard Specification for Tool Steels Alloy | |
ASTM A683 | Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types | |
ASTM A684/A684M | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled | |
ASTM A686 | Standard Specification for Tool Steel, Carbon | |
ASTM A688/A688M | Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes | |
ASTM A689 | Standard Specification for Carbon and Alloy Steel Bars for Springs | |
ASTM A690/A690M | Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments | |
ASTM A691/A691M | Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures | |
ASTM A693 | Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip | |
ASTM A694/A694M | Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service | |
ASTM A696 | Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components | |
ASTM A697/A697M | Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods | |
ASTM A698/A698M | Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields | |
ASTM A700 | Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment | |
ASTM A701/A701M | Standard Specification for Ferromanganese-Silicon | |
ASTM A702 | Standard Specification for Steel Fence Posts, Hot Wrought | |
ASTM A703/A703M | Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts | |
ASTM A704/A704M | Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement | |
ASTM A705/A705M | Standard Specification for Age-Hardening Stainless Steel Forgings | |
ASTM A706/A706M | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement | |
ASTM A707/A707M | Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service | |
ASTM A709/A709M | Standard Specification for Structural Steel for Bridges | |
ASTM A710/A710M | Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates | |
ASTM A711/A711M | Standard Specification for Steel Forging Stock | |
ASTM A712 | Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys | |
ASTM A713 | Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components | |
ASTM A716 | Standard Specification for Ductile Iron Culvert Pipe | |
ASTM A717/A717M | Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens | |
ASTM A719/A719M | Standard Test Method for Lamination Factor of Magnetic Materials | |
ASTM A720/A720M | Standard Test Method for Ductility of Nonoriented Electrical Steel | |
ASTM A721/A721M | Standard Test Method for Ductility of Oriented Electrical Steel | |
ASTM A722/A722M | Standard Specification for High-Strength Steel Bars for Prestressed Concrete | |
ASTM A723/A723M | Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application | |
ASTM A724/A724M | Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels | |
ASTM A726 | Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types | |
ASTM A727/A727M | Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness | |
ASTM A729/A729M | Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service | |
ASTM A732/A732M | Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures | |
ASTM A733 | Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples | |
ASTM A734/A734M | Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered | |
ASTM A735/A735M | Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service | |
ASTM A736/A736M | Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel | |
ASTM A737/A737M | Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel | |
ASTM A738/A738M | Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service | |
ASTM A739 | Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both | |
ASTM A740 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) | |
ASTM A741 | Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail | |
ASTM A742/A742M | Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe | |
ASTM A743/A743M | Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application | |
ASTM A744/A744M | Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service | |
ASTM A745/A745M | Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings | |
ASTM A746 | Standard Specification for Ductile Iron Gravity Sewer Pipe | |
ASTM A747/A747M | Standard Specification for Steel Castings, Stainless, Precipitation Hardening | |
ASTM A748/A748M | Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use | |
ASTM A749/A749M | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for | |
ASTM A751 | Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products | |
ASTM A753 | Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080) | |
ASTM A754/A754M | Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence | |
ASTM A755/A755M | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products | |
ASTM A756 | Standard Specification for Stainless Anti-Friction Bearing Steel | |
ASTM A757/A757M | Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service | |
ASTM A758/A758M | Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness | |
ASTM A759 | Standard Specification for Carbon Steel Crane Rails | |
ASTM A760/A760M | Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains | |
ASTM A761/A761M | Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches | |
ASTM A762/A762M | Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains | |
ASTM A763 | Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels | |
ASTM A764 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs | |
ASTM A765/A765M | Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements | |
ASTM A767/A767M | Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement | |
ASTM A768/A768M | Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts | |
ASTM A769/A769M | Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes | |
ASTM A770/A770M | Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications | |
ASTM A772/A772M | Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current | |
ASTM A773/A773M | Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs | |
ASTM A774/A774M | Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures | |
ASTM A775/A775M | Standard Specification for Epoxy-Coated Steel Reinforcing Bars | |
ASTM A778/A778M | Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products | |
ASTM A779/A779M | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete | |
ASTM A780/A780M | Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings | |
ASTM A781/A781M | Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
ASTM A786/A786M | Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates | |
ASTM A787/A787M | Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing | |
ASTM A788/A788M | Standard Specification for Steel Forgings, General Requirements | |
ASTM A789/A789M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service | |
ASTM A790/A790M | Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe | |
ASTM A792/A792M - 10(2015) | Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process | |
ASTM A793 | Standard Specification for Rolled Floor Plate, Stainless Steel | |
ASTM A794/A794M | Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled | |
ASTM A795/A795M | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use | |
ASTM A796/A796M | Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications | |
ASTM A798/A798M | Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications | |
ASTM A799/A799M | Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content | |
ASTM A800/A800M | Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof | |
ASTM A801 | Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650) | |
ASTM A802 | Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination | |
ASTM A803/A803M | Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes | |
ASTM A804/A804M | Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens | |
ASTM A805/A805M | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled | |
ASTM A807/A807M | Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications | |
ASTM A809 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire | |
ASTM A810 | Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh | |
ASTM A811 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques | |
ASTM A813/A813M | Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe | |
ASTM A814/A814M | Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe | |
ASTM A815/A815M | Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings | |
ASTM A817 | Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire | |
ASTM A818 | Standard Specification for Coppered Carbon Steel Wire | |
ASTM A820/A820M | Standard Specification for Steel Fibers for Fiber-Reinforced Concrete | |
ASTM A821/A821M | Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks | |
ASTM A822/A822M | Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service | |
ASTM A823 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings | |
ASTM A824 | Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence | |
ASTM A827/A827M | Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications | |
ASTM A829/A829M | Standard Specification for Alloy Structural Steel Plates | |
ASTM A830/A830M | Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements | |
ASTM A832/A832M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium | |
ASTM A833 | Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
ASTM A834 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use | |
ASTM A835/A835M | Standard Specification for Sizes of Ferroalloys and Alloy Additives | |
ASTM A836/A836M | Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | |
ASTM A837/A837M | Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | |
ASTM A838 | Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications | |
ASTM A839 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications | |
ASTM A841/A841M | Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) | |
ASTM A842 | Standard Specification for Compacted Graphite Iron Castings | |
ASTM A844/A844M | Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process | |
ASTM A847/A847M | Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | |
ASTM A848 | Standard Specification for Low-Carbon Magnetic Iron | |
ASTM A849 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | |
ASTM A853 | Standard Specification for Steel Wire, Carbon, for General Use | |
ASTM A854/A854M | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | |
ASTM A855/A855M | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | |
ASTM A856/A856M | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire | |
ASTM A857/A857M | Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage | |
ASTM A858/A858M | Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service | |
ASTM A859/A859M | Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | |
ASTM A860/A860M | Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings | |
ASTM A861 | Standard Specification for High-Silicon Iron Pipe and Fittings | |
ASTM A862/A862M | Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | |
ASTM A865/A865M | Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | |
ASTM A866 | Standard Specification for Medium Carbon Anti-Friction Bearing Steel | |
ASTM A867 | Standard Specification for Iron-Silicon Relay Steels | |
ASTM A871/A871M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance | |
ASTM A872/A872M | Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments | |
ASTM A874/A874M | Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | |
ASTM A875/A875M | Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process | |
ASTM A876 | Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types | |
ASTM A877/A877M | Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality | |
ASTM A878/A878M | Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality | |
ASTM A879/A879M | Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
ASTM A881/A881M | Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete | |
ASTM A882/A882M | Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand | |
ASTM A884/A884M | Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement | |
ASTM A886/A886M | Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete | |
ASTM A887 | Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application | |
ASTM A888 | Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications | |
ASTM A889/A889M | Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame | |
ASTM A890/A890M | Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application | |
ASTM A891/A891M | Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels | |
ASTM A892 | Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels | |
ASTM A893/A893M | Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies | |
ASTM A895 | Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip | |
ASTM A896/A896M | Standard Practice for Conducting Case Studies on Galvanized Structures | |
ASTM A897/A897M | Standard Specification for Austempered Ductile Iron Castings | |
ASTM A898/A898M | Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes | |
ASTM A899 | Standard Specification for Steel Wire, Epoxy-Coated | |
ASTM A900/A900M | Standard Test Method for Lamination Factor of Amorphous Magnetic Strip | |
ASTM A901 | Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types | |
ASTM A902 | Standard Terminology Relating to Metallic Coated Steel Products | |
ASTM A903/A903M | Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection | |
ASTM A904 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts | |
ASTM A905 | Standard Specification for Steel Wire, Pressure Vessel Winding | |
ASTM A906/A906M | Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | |
ASTM A908 | Standard Specification for Stainless Steel Needle Tubing | |
ASTM A909/A909M | Standard Specification for Steel Forgings, Microalloy, for General Industrial Use | |
ASTM A910/A910M | Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete | |
ASTM A911/A911M | Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties | |
ASTM A912/A912M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens | |
ASTM A913/A913M | Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) | |
ASTM A914/A914M | Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | |
ASTM A915/A915M | Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades | |
ASTM A917 | Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | |
ASTM A918 | Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
ASTM A920/A920M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | |
ASTM A921/A921M | Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | |
ASTM A922 | Standard Specification for Silicon Metal | |
ASTM A923 | Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | |
ASTM A924/A924M | Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process | |
ASTM A925 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | |
ASTM A927/A927M | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method | |
ASTM A928/A928M | Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal | |
ASTM A929/A929M | Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | |
ASTM A930 | Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
ASTM A931 | Standard Test Method for Tension Testing of Wire Ropes and Strand | |
ASTM A932/A932M | Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens | |
ASTM A934/A934M | Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars | |
ASTM A937/A937M | Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | |
ASTM A938 | Standard Test Method for Torsion Testing of Wire | |
ASTM A939/A939M | Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
ASTM A940/A940M | Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors | |
ASTM A941 | Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
ASTM A942/A942M | Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells | |
ASTM A943/A943M | Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | |
ASTM A944 | Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
ASTM A945/A945M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness | |
ASTM A947M | Standard Specification for Textured Stainless Steel Sheet [Metric] | |
ASTM A949/A949M | Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | |
ASTM A950/A950M | Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | |
ASTM A951/A951M | Standard Specification for Steel Wire for Masonry Joint Reinforcement | |
ASTM A952/A952M | Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | |
ASTM A955/A955M | Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement | |
ASTM A956 | Standard Test Method for Leeb Hardness Testing of Steel Products | |
ASTM A957/A957M | Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
ASTM A958/A958M | Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
ASTM A959 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | |
ASTM A960/A960M | Standard Specification for Common Requirements for Wrought Steel Piping Fittings | |
ASTM A961/A961M | Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | |
ASTM A962/A962M | Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
ASTM A964/A964M | Standard Specification for Corrugated Steel Box Culverts | |
ASTM A965/A965M | Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts | |
ASTM A966/A966M | Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current | |
ASTM A967/A967M | Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts | |
ASTM A968/A968M | Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service | |
ASTM A970/A970M | Standard Specification for Headed Steel Bars for Concrete Reinforcement | |
ASTM A971/A971M | Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils | |
ASTM A972/A972M | Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles | |
ASTM A973/A973M | Standard Specification for Grade 100 Alloy Steel Chain | |
ASTM A974 | Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated) | |
ASTM A975 | Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) | |
ASTM A976 | Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application | |
ASTM A977/A977M | Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs | |
ASTM A978/A978M | Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications | |
ASTM A979/A979M | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field | |
ASTM A980/A980M | Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled | |
ASTM A981/A981M | Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors | |
ASTM A982/A982M | Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils | |
ASTM A983/A983M | Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines | |
ASTM A985/A985M | Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts | |
ASTM A986/A986M | Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings | |
ASTM A987/A987M | Standard Practice for Measuring Shape Characteristics of Tin Mill Products | |
ASTM A988/A988M | Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
ASTM A989/A989M | Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service | |
ASTM A990/A990M | Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service | |
ASTM A991/A991M | Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products | |
ASTM A992/A992M | Standard Specification for Structural Steel Shapes | |
ASTM A994 | Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys | |
ASTM A995/A995M | Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts | |
ASTM A996/A996M | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement | |
ASTM A997 | Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination | |
ASTM A998/A998M | Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications | |
ASTM A999/A999M | Standard Specification for General Requirements for Alloy and Stainless Steel Pipe | |
ASTM A1000/A1000M | Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality | |
ASTM A1001 | Standard Specification for High Strength Steel Castings in Heavy Sections | |
ASTM A1002 | Standard Specification for Castings, Nickel-Aluminum Ordered Alloy | |
ASTM A1003/A1003M | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members | |
ASTM A1004/A1004M | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members | |
ASTM A1007 | Standard Specification for Carbon Steel Wire for Wire Rope | |
ASTM A1008/A1008M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable | |
ASTM A1009 | Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications | |
ASTM A1010/A1010M | Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip | |
ASTM A1011/A1011M | Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
ASTM A1012 | Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins | |
ASTM A1013 | Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method | |
ASTM A1014/A1014M | Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service | |
ASTM A1015 | Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications | |
ASTM A1016/A1016M | Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes | |
ASTM A1017/A1017M | Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten | |
ASTM A1018/A1018M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength | |
ASTM A1020/A1020M | Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications | |
ASTM A1021/A1021M | Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service | |
ASTM A1022/A1022M | Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement | |
ASTM A1023/A1023M | Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes | |
ASTM A1024/A1024M | Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless | |
ASTM A1025/A1025M | Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements | |
ASTM A1028 | Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils | |
ASTM A1030/A1030M | Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products | |
ASTM A1031/A1031M | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled | |
ASTM A1032 | Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe | |
ASTM A1033 | Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations | |
ASTM A1034/A1034M | Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars | |
ASTM A1035/A1035M | Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement | |
ASTM A1036 | Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers | |
ASTM A1037/A1037M | Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded | |
ASTM A1038 | Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method | |
ASTM A1039/A1039M | Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
ASTM A1040 | Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels | |
ASTM A1043/A1043M | Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings | |
ASTM A1044/A1044M | Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete | |
ASTM A1045 | Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems | |
ASTM A1046/A1046M | Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process | |
ASTM A1047/A1047M | Standard Test Method for Pneumatic Leak Testing of Tubing | |
ASTM A1049/A1049M | Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components | |
ASTM A1053/A1053M | Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe | |
ASTM A1054 | Standard Specification for Sintered Ferrite Permanent Magnets | |
ASTM A1055/A1055M | Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars | |
ASTM A1056 | Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings | |
ASTM A1057/A1057M | Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
ASTM A1058 | Standard Test Methods for Mechanical Testing of Steel Products—Metric | |
ASTM A1059/A1059M | Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products | |
ASTM A1060/A1060M | Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
ASTM A1061/A1061M | Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand | |
ASTM A1062 | Standard Specification for Steel Castings Sampling | |
ASTM A1063/A1063M | Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process | |
ASTM A1064/A1064M | Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete | |
ASTM A1065/A1065M | Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point | |
ASTM A1066/A1066M | Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP) | |
ASTM A1067/A1067M | Standard Specification for Test Coupons for Steel Castings | |
ASTM A1068 | Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products | |
ASTM A1069/A1069M | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes | |
ASTM A1070 | Standard Specification for Cast and Sintered Alnico Permanent Magnets | |
ASTM A1071/A1071M | Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys | |
ASTM A1072/A1072M | Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products | |
ASTM A1073/A1073M | Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet | |
ASTM A1074 | Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals | |
ASTM A1075 | Standard Specification for Flanged Steel U-Channel Posts | |
ASTM A1076/A1076M | Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel | |
ASTM A1077/A1077M | Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings | |
ASTM A1078/A1078M | Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement | |
ASTM A1079 | Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process | |
ASTM A1080 | Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings | |
ASTM A1081/A1081M | Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand | |
ASTM A1082/A1082M | Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications | |
ASTM A1083/A1083M | Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process | |
ASTM A1084 | Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels | |
ASTM A1085/A1085M | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) | |
ASTM A1086 | Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types | |
ASTM A1087/A1087M | Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet | |
ASTM A1088 | Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP) | |
ASTM A1089/A1089M | Standard Specification for Highly Loaded Anti-Friction Bearing Steel | |
ASTM A1090/A1090M | Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance | |
ASTM A1091/A1091M | Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service | |
ASTM A1092 | Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet | |
ASTM A1093/A1093M | Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials | |
ASTM A1094/A1094M | Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement | |
ASTM A1095 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings | |
ASTM A1096/A1096M | Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement | |
ASTM A1097 | Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger) | |
ASTM A1098/A1098M | Standard Specification for Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s) | |
ASTM A1099/A1099M | Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels | |
ASTM A1100 | Standard Guide for Qualification and Control of Induction Heat Treating | |
ASTM A1101 | Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets | |
ASTM A1102 | Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets | |
ASTM A1103/A1103M | Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications | |
ASTM A1106/A1106M | Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application |